Shop
This is where you can browse products in this store.
All Brands
All Categories
- NGI (53)
- Analyzer IM7580 (1)
- Color, Light and Display Test Solution (19)
- Data Logger (2)
- DC Electronic Load (3)
- Electrical Test Solution (54)
- Electronics Test Solution (219)
- Environment Test Solution (34)
- ETAC (14)
- High Precision Multi Channel Programmable DC Power Supply (1)
- High Precision Source Measure Unit (1)
- Hioki (5)
- Kanomax (7)
- Konica Minolta (17)
- Material Property Test Solution (12)
- MEMORY HiCORDER (3)
- Particle Counters (1)
- Probes (3)
- Rigol (180)
- Yasuda Seiki (14)
Search By Ratings
-
- Battery Simuators (Bidirectional Current), Battery Simulator, Electrical Test Solution, NGI
NGI N8352 Bidirectional High-accuracy Battery Simulator (2CH) | nanotech-tmi
- ●Voltage range：0-6V/0-15V/0-20V ●Current range：-1~1A/-2~2A/-3~3A/-5~5A ●Voltage ripple noise low to 2mVrms ●Dual LAN port and RS232 interface ●Voltage accuracy up to 0.01%+1mV ●μA level current measurement ●Ultra-fast dynamic response without overshoot ●Built-in two-channel high-accuracy DVM measurement ●High definition touch screen
- Read more
-
- Battery Simuators (Bidirectional Current), Battery Simulator, Electrical Test Solution, NGI
NGI N83524 24 Channels Bidirectional Battery Simulator (6V/CH)
- ●Voltage range: 0-6V ●Current range: ±1A/±3A/±5A ●Voltage accuracy up to 0.6mV ●μA-level current measurement ●High integration,standalone up to 24 channels, each channel isolated ●Voltage ripple noise ≤2mVrms ●μs-level dynamic response, simulating the characteristics of real battery ●Optional NB108 series products to achieve fault simulation and nA-level current measurement ●Supporting charge mode, battery simulation, SEQ test, SOC test ●4.3 inch high-definition…
- Read more
-
- DC Power Supply, DC Power Supply, DC Power Supply, Electrical Test Solution, Electronics Test Solution, NGI
NGI N8361F Bipolar DC Power Supply (±20V/±10A) | nanotech-tmi
- Voltage Range:-20V~+20V Current Range: -10A~+10A,Power Range：0-200W Voltage rise and fall time ≤50μs Support SEQ mode High accuracy: Voltage accuracy 0.01%+2mV, current accuracy up to 1μA High precision DVM Support front and rear outlet, easier for desktop & integration With digital I/O, supporting trigger test LAN/RS232/CAN Interface
- Read more
-
- Material Property Test Solution, Yasuda Seiki
No.102 Geer Aging Oven
- Specifications are subject to change without notice. Inner dimensions W450 × D450 × H500 mm W600 × D600 × H600 mm Entire Heated Space Volume 225,225 cm3 417,600 cm3 Temperature range Room Temperature + 20 to 300 °C * Room Temperature + 20 to 300 °C * Air velocity Low: 0.5 ± 0.1 m/s, High: 1.0 ± 0.2 m/s (Controlled…
- Read more
-
- Material Property Test Solution, Yasuda Seiki
No.152 Akrin rubber abrasion tester
- Specifications are subject to change without notice. Specimen φ63.5 ± 0.5 mm, T12.7 ± 0.5 mm, φ12.7 ± 0.1 mm Specimen Rotation speed 250 ± 5 rpm Inclination Angle 0 to 30° (Normal: 15°) Test Load 27.0N (2.75kgf), 44.1N (4.50kgf) Option Suction Device (Vacuum Cleaner) Power source AC 100 V, 1-phase, 10 A, 50/60 Hz Dimensions/ Weight (Approx.) W600 ×…
- Read more
-
- Material Property Test Solution, Yasuda Seiki
No.216-5kN Universal material tester
- Specifications are subject to change without notice. Model No.216-5kN UNIVERSAL MATERIAL TESTER Test Load Max. 5 kN Stroke 1,000 mm* Test Speed 1 to 1,000 mm/min Accessories Chuck shapes are to be consulted. Options CSV Export Software, Extensometer (Stroke: 50 to 500 mm, Accuracy: ± 0.5 mm) Power Source AC 100 V, 1-Phase, 10 A, 50/60 Hz Dimensions/ Weight (Approx.) W550…
- Read more
-
- Yasuda Seiki
No.260 Foam rubber repeated compression tester
- Specifications are subject to change without notice. Hanging 2 Hangings Specimen T20 mm or More, Width or Length 50 mm or More Compression Platen 310 × 310 mm, Vent φ6 mm (Pitch 20 mm) Compression Stroke 10 to 100 mm (2 Lines Adjustable) Compression Speed 60 〜 180 times/min Counter 6 Digits Preset Counter Option Safety Cover, Emergency Stop Switch…
- Read more
-
- Out of Stock
- Impact Tester, Material Property Test Solution, Yasuda Seiki
No.268 Universal Impact Tester
- Specifications are subject to change without notice. Temperature Range -70 °C to 80 °C (Refrigerator) Hammer Please consult. Anvil Automatic Specimen Setting Device, Rejection Device for Tested Specimens Test Specimens 70 pcs × 3 Cassettes (Total 210 pcs) *When Specimen size is W10 × T4 × L80 mm Software Windows Compatible Option Specimen Size Measuring Device Power Source AC 200…
- Read more
-
-
- Electronics Test Solution
NoiseKen EPS-02 Series Spatial Magnetic Field Visualization System
- Specification Details Model Name/Number EPS-02EMFv2 / EPS-02Hv2 Brand NoiseKen Frequency Range 10 Hz to 400 kHz Frequency Selection Available (EMFv2) / Not Available (Hv2) Measurement Unit dBμV, dBm (EMFv2) / T, G, A/m, % (Hv2) Measured Axis X, Y, Z (EMFv2) / X, Y, Z, combined effective values (Hv2) Usage/Application EMC/EMI Debugging / Countermeasure Validation / On-site Diagnostics
- Read more
-
- Electronics Test Solution
NoiseKen ESS-B3011A electrostatic discharge (ESD) simulator
- Parameter Specification Model ESS-B3011A Output voltage 0.20 kV ～ 30.0 kV ± 5% (30.5 kV max) *0.20kV ～ 1.99kV ±10% 2.00kV ～ 30.0kV ±5% ～ 10.0kV ： 0.01kV step 10.0 ～ 30.0kV ： 0.1kV step Polarity Positive / Negative Repetition cycle 0.05s ～ 9.99s ± 10%, 0.01s step / Manual Discharge No. of times 1 ～ 999 times, Preset 1 time…
- Read more
-
- Electronics Test Solution
NoiseKen ISS-T1321 FORD Standard Transient Pulse Generator
- Specification Details Model Name/Number ISS-T1321 Brand NoiseKen Compliance Standard FORD EMC-CS-2009 Generated Pulses (RI130 / CI220) Pulse A1 / A2-1 / A2-2 / C1 / C2 Generated Fluctuation (CI260) Waveform F DC Max Input Voltage DC 13.5 V Usage/Application Automotive Electronics Surge Testing / EMC Compliance
- Read more
