EMI/EMC Test Solution
We supply all necessary & required EMC Test Solutions for EMC pre-compliance in the development laboratory, through to full compliance tests requiring standard-conformant equipment and procedures. Our EMC Test Solutions is suitable to perform both interference and immunity tests.
In this range, we have below products range:
The multifunctional Immunity Test System is suitable to perform Transient Pulse, Surge & Voltage Dip with wide range of Output Voltage in kV. This system meets all the requirements of international standards and product standards by using CDN as per the sample. The system can be used with both Single Phase CDN & Three Phase CDN as accessory or It can be in- built.
The system is with Colour touch screen & we can get Surge failure detection, Data acquisition of surge voltage and current, Test sequence function, Built-in multifunctional testing modules.
The system is suitable for application such as: Communication, Technology, Telecom, Military, Medical, Avionics, Broadcast and TV, New Energy Electrical Power, Railway & New Energy Vehicle.
This system meets Test Standard: IEC 61000-4-5; IEC 61000-4-9; IEC 61000-4-4; IEC 61000-4-8;
IEC 61000-4-11; IEC 61000-4-29; IEC 61008-1; IEC 61009-1; GB/T 17626.5; GB/T 17626.4; GB/T 17626.8; GB/T 17626.9; GB/T 17626.11; GB/T 17626.29; EN 61000-4-5; EN 61000-4-9; EN 61000-4-4;
EN 61000-4-11; EN 61008-1; EN 61009-1; EN 61543; EN 61000-4-8; EN 61000-4-29; ANSI/IEEE C62.41
EMC test equipment to evaluate the resistibility of electronic equipment when electrostatic charges on a human body or object has been discharged to the electronic equipment.
This product ESD Simulator can be used for evaluating performance degradation of any types of electronic products.
The electrostatic discharge simulator which also known as ESD is being used to infuse Electrostatic in the Test Sample or DUT as per IEC/EN 61000-4-2 with output voltage up to Max 30 kV. The system is with contact type & non contact type and with changeable RC module, which ensure the reliability in all types of test sites.
The system is suitable for application such as: Communication, Telecom, Medical, Broadcast, Railway, IT, Military, Avionics & New Energy.
This test system meets Test Standard: Bellcore GR-1089-Core; ISO 14304; IEC 61000-6-2;
IEC 61000-6-1; IEC 61326; IEC 61340-3-1; IEC 61000-4-2; GB/T 17626.2; EN 61000-6-1;
EN 61000-6-2; EN 61326; ITU-T K.20
EFT Burst Simulator or Fast Transient Simulator is being used to reproduce fast repetitive high frequency pulses which are generated when switching ON/OFF electric current on the inductive load as per International Standard IEC 61000-4-4. This test standard defines immunity tests for power supply lines or I/O signal lines against fast transient repetitive bursts.
The system features high reliability, stable performance and convenience to use. Its built-in coupling/decoupling network can couple maximum 4.8 kV pulse voltage onto mains supply system. The equipment has feature of DC & AC both load capacity, EUT Power Automatic Switching over,
EUT voltage and current detection, Overvoltage, over-current protection, Setting test voltage, polarity and phase sync angle by scheduling and fully automatic network switching over & Phase angle superposition for any line.
This test system meets Test Standard: IEC 61000-6-1; IEC 61000-6-2; IEC 61000-4-4; GB/T 17626.4; EN 61000-4-4;
Surge Simulator also known as Light Surge Simulator is used to reproduce “High energy induced lightning noise” which is induced by potential change on the ground, or done to power lines or telephone lines as result of lightning current.
We offers various types of Surge Simulator which is designed as per International Test Standard including IEC61000-4-5, IEC61643-1, GB/T 17626.5, JEC 210/212 etc and is widely used in many industries.
Our System is able to perform Immunity Test with max pulse voltage is 20 kV and its max pulse current is 20 kA.
We can generate various waveform such as Combination Waveform 1.2/50 & 8/20 ms; Voltage Waveform 1.2/50ms, Current Waveform 8/20 ms, Communication Waveform 10/ 700 ms.
The system have feature of colour touch screen front panel, Warning system: automatic detection of plenty errors; Remote control with LAN interface port; Enhanced safety with built-in & 19” standard cabinet.
Power frequency magnetic field simulator is designed to conduct power frequency magnetic field immunity test of electrical and electronic products. This system follows International Test Standard such as IEC/EN 61000-4-8 and GB/T17626.8. It can offer accurate reference for EUT during power frequency magnetic field immunity test. It is mainly to simulate the magnetic environment in residence, commercial and industrial district, power station, and low and high substation.
This system have feature of Color touch screen front panel, Fully Compliance with International Test Standard, Electromagnetic relay protection with voltage/current higher than rated values, Over-temperature protection, Test sequencing via control software AutoLab, Ethernet RJ45 for PC remote control, Easy test report generation.
This simulator is capable of simulating the repetitive transient phenomenon generating on power, control and signal cables installed in high voltage and medium voltage stations and damped oscillatory magnetic fields generated by switching of HV bus-bars by isolators or disconnectors. It can perform tests compliant with IEC 61000-4-18 and IEC 61000-4-10.
This system have feature of Color touch screen, Test voltage up to 3.3 kV, Magnetic field strength up to 100 A/m, Built-in 3-phase CDN, current up to 100 A, LAN Ethernet interface is used for remote control etc.
This product meets the International Standards IEC61000-4-18, IEC61000-4-10, IEC255-22-1, ANSI C37.90
This simulator is being used to reproduce voltage variation phenomena in commercial power supplies (AC100V/200V).
This type of immunity test against voltage variation phenomena is defined in IEC 61000-4-11 and is widely used in many industries.
This product is in single/ three-phase power available to simulate voltage dip, interruption and variation which are caused by power grid and transformer devices due to malfunction or sudden large change of load. It is required to test this kind of phenomena to check whether electronic and electrical device can sustain safety operating condition. PFS series single/ three-phase power fail simulator is equipped with controllable semi-conductor switches with protection function as per IEC 61000-4-11/34, GB/T17626.11/34.
Those equipments are being used in various application such as Communication; Telecom; Medical; Broadcast; Railway; Technology; Military; Avionics; New energy & Electrical Vehicle.