NoiseKen ESS-B3011A electrostatic discharge (ESD) simulator
NoiseKen ESS-B3011A electrostatic discharge (ESD) simulator
| Parameter | Specification |
|---|---|
| Model | ESS-B3011A |
| Output voltage | 0.20 kV ～ 30.0 kV ± 5% (30.5 kV max) *0.20kV ～ 1.99kV ±10% 2.00kV ～ 30.0kV ±5% ～ 10.0kV ： 0.01kV step 10.0 ～ 30.0kV ： 0.1kV step |
| Polarity | Positive / Negative |
| Repetition cycle | 0.05s ～ 9.99s ± 10%, 0.01s step / Manual |
| Discharge No. of times | 1 ～ 999 times, Preset 1 time step or continuous preset |
| Discharge mode | Contact discharge / Air discharge |
| Trigger mode | Gun trigger / Main trigger |
| Operation panel | Indicator : 5 x 7 Dot matrix LED / Operation : Push buttons (Partially lighting) |
| Radiation mode select switch | Extra / Normal switching function built-in |
| Discharge detection | Discharge detection function in air-discharge equipped. |
| Pre-checking function | High voltage output checking function (by user operation. Not the calibration but just checking) |
| CR & Gun head checking |
CR constant and gun head recognizable (to prevent the wrong combination without indicator) |
| IEC LEVEL | Contact discharge mode : 2.0 kV, 4.0 kV, 6.0 kV and 8.0 kV step |
| Switching function | Air discharge mode : 2.0 kV, 4.0 kV, 8.0 kV and 15.0 kV step |
| Warning lamp | Lighting at voltage output from the generator. Blinking at electro-static discharging |
| Charge capacitor / resistor | 150 pF ±10%, 330 Ω ± 10% (Built-in CR unit for discharge gun GT-30RA) |
| Charge resistor in generator | 10 MΩ (Totally 53 Ω in combination with 43 MΩ in discharge gun)* |
| Power supply / consumption | AC 100 V ～ AC 240 V ± 10% 50 Hz / 60 Hz 62 VA |
| Dimensions | Generator : (W)270 mm x (H)263 mm x (D)200 mm Discharge gun : (W)83.3 mm x (H)217.2 mm x (D)229.3 mm |
| Weight | Generator : Approx. 4.6 kg Discharge gun : Approx. 1080 g (excluding cable and connector) |
Description
The NoiseKen ESS-B3011A electrostatic discharge (ESD) simulator delivers a highly robust, turnkey compliance solution for engineers developing sensitive electronic assemblies, consumer devices, and industrial control systems. Laboratory directors and quality assurance specialists utilize this heavy-duty test instrument to simulatively generate high-energy static discharges, ensuring that human-to-machine interactions will not cause catastrophic field failures. This specific system addresses the critical industrial requirement for high-voltage testing, allowing teams to seamlessly validate equipment immunity according to the strict IEC 61000-4-2 and EN 61000-4-2 standards.
Instead of forcing your R&D department to rely on unreliable, uncalibrated static sources or expensive third-party testing labs, your facility achieves a massive technical advantage with the NoiseKen ESS-B3011A. The system provides an exceptional maximum output voltage of 30 kV for both contact and air discharges. This extreme voltage headroom allows engineers to confidently perform destructive breakdown resistibility tests well beyond the base 8kV/15kV standard requirements.
| Component | Function | Key Specifications |
| ESS-B3011A Mainframe | Voltage Generation & Control | Up to 30 kV, Pre-programmed IEC standard tests |
| GT-30RA Discharge Gun | Application & Discharge | Lightweight, Ergonomic trigger, Built-in LED light |
Therefore, you can confidently perform critical static immunity testing on everything from standard consumer electronics to heavily shielded industrial equipment, isolating shielding vulnerabilities instantly.
NoiseKen ESS-B3011A Technical Advantages
This enterprise-grade ESD simulator packs elite compliance capabilities into a highly intuitive, automated platform. The ESS-B3011A mainframe is designed to eliminate the complexity of manual test setups by including the IEC standard test levels directly in its pre-programmed memory. Engineers can simply select the required test severity level and immediately begin validation.
Modern EMC laboratories require seamless operation and unyielding operator comfort to maximize daily engineering efficiency. Therefore, the system pairs with the GT-30RA Discharge Gun. This industry-leading gun is meticulously engineered for optimal balance and lightweight handling, drastically reducing operator wrist fatigue during extended, multi-point testing sessions. Furthermore, the GT-30RA features a bright built-in LED light, illuminating the exact discharge target area on dark or densely packed circuit boards.
When your project demands absolute compliance and unmatched testing reliability, the NoiseKen ESS-B3011A stands out as the premier choice. Stop allowing field failures from electrostatic transients to compromise your brand reputation. Contact nanotech-tmi today to request a comprehensive technical datasheet or a custom quotation. Trust nanotech-tmi for all your high-precision Electronics Test Solution requirements!
Reviews
There are no reviews yet.