No.260 Foam rubber repeated compression tester
No.260 Foam rubber repeated compression tester
| Specifications are subject to change without notice. | |
| Hanging | 2 Hangings |
| Specimen | T20 mm or More, Width or Length 50 mm or More |
| Compression Platen | 310 × 310 mm, Vent φ6 mm (Pitch 20 mm) |
| Compression Stroke | 10 to 100 mm (2 Lines Adjustable) |
| Compression Speed | 60 〜 180 times/min |
| Counter | 6 Digits Preset Counter |
| Option | Safety Cover, Emergency Stop Switch |
| Power Source | AC 200 V, 3-Phase, 15 A, 50/60 Hz |
| Dimensions/ Weight (Approx.) | W1,130 × D600 × H1,460 mm/ 292 kg |
Description
- This tester is used to repeatedly test compression residual strain of polyurethane foam and latex foam soft material according to the constant displacement method.
- Placing the test specimen between the two parallel plates and continuously repeating the compression to the test specimen 80,000 times at a compressing power so that the test specimen’s thickness becomes 50 % of the initial size.
- 30 minutes after the test specimen has been repeatedly compressed, the decreasing rate of the test specimen’s thickness is to be measured.
Reviews
There are no reviews yet.