Fast Transient Burst Simulator(FNS) Fast transient / burst simulator FNS-AX4-A20 / B63
Fast Transient Burst Simulator(FNS) Fast transient / burst simulator FNS-AX4-A20 / B63
| Parameter | Specification / Function |
|---|---|
| Output voltage | 200 to 5000 V 10 V Step |
| Polarity | Positive or negative, polarity alternation possible per burst |
| Repetition frequency | 0.1 kHz to 2000 kHz 0.1 kHz to 1 kHz / 0.01 kHz step Tolerance ± 5%, 1.0 kHz to 10 kHz / 0.1 kHz step Tolerance ± 5% 10 kHz to 100 kHz / 1 kHz step Tolerance ± 5%, 100 kHz to 1000 kHz / 10 kHz step Tolerance ± 5% 1000 kHz to 2000 kHz / 100 kHz step Tolerance ± 10%, (Limitation per voltage levels when continuous output) |
| Number of pulses | 1 to 1000 at a step of 1 pulse , Setting limit: 1 pulse per ms in a burst (repetition frequency 1 kHz or more) |
| Burst duration | Formula for Burst duration = Pulse number / Repetition Frequency Scope of manually setting value for burst duration: 0.01 to 999 ms |
| Burst period | 10 to 1000ms ± 10% 10ms steps (500ms or more for polarity alternate mode) |
| Polarity alternate function | Output polarity alternated between positive and negative at each burst period Setting condition: the burst period is 500ms or more and the burst pause period [ (burst period) – (burst duration)] is 100ms or more Maximum test time: 10 minutes |
| Continuous Pulse output | Up to 1000 V -10 kHz or less, to 2000 V -4 kHz or less, to 5000 V -1 kHz or less. Maximum test time for each case: 10 min |
| Frequency modulation | Frequency is shifted continuously between set frequency and approximately -10% from the set frequency. The modulating wave is triangular wave of approximately 20Hz |
| External trigger | External trigger input invokes 1 burst output in synchronization with the trigger input. Trigger specification: Hi (+ 5V) → Lo (0 V) triggers one burst period. |
| Pulse waveform (at 50 Ω load) | Pulse peak voltage: (set voltage / 2) ± 10% Rise time: 5 ns ± 30% Pulse width: 50 ns ± 30% |
| Pulse waveform (at 1 kΩ load) | Pulse peak voltage: (set voltage x 0.95) ± 20% Rise time: 5 ns ± 30% Pulse width: 35 to 150 ns |
| DC blocking capacitor | 10nF ± 20% |
Description
It is compact and equipped with new functions to make EMC testing easier.
It is a tester that evaluates the resistance of electronic devices by simulating high-frequency noise that rises quickly due to discharge between contacts of switching devices and arc discharge generated from electronic motors.
- IEC 61000-4-4 Ed.3 standard compliance.
- Pre-check function equipped, making. inspection before testing easier.
- Normal mode test support. for testing for real field troubles. (option)
- Utilize an outlet box that simplifies EUT connection. (option)
- Compared with conventional products, the size has become compact. (Approximately 67% by volume)
- Easy to understand Panel display reduces mistakes in connecting power cables.
- Windows compatible software control. (option)
- Next calibration date notification. (Windows software only)
- LCD screen with multi-language support and enhanced operability.
- Maximum output voltage of 5 kV and maximum pulse frequency of 2 MHz allowing to test above the standard test level.
- CDN capacity is increased to single phase type AC 240 V 20 A, single and three phase type to AC 600 V 63 A, supporting a wider range of EUTs.
- Large capacity CDN (100 A or 150 A) option available for Injection test on various EUTs.
- Using coupling clamps and EMS probe kit, allows to test signal lines and evaluate noise immunity on PCBs. (option)
Reviews
There are no reviews yet.